TED Talks-Catarina Mota: Play with smart materials

The following information is used for educational purposes only.


































Transcript:




I have a friend in Portugalwhose grandfather built a vehicle out of a bicycleand a washing machine so he could transport his family.He did it because he couldn't afford a car,but also because he knew how to build one.There was a time when we understood how things workedand how they were made, so we could build and repair them,or at the very leastmake informed decisions about what to buy.Many of these do-it-yourself practiceswere lost in the second half of the 20th century.But now, the maker community and the open-source modelare bringing this kind of knowledge about how things workand what they're made of back into our lives,and I believe we need to take them to the next level,to the components things are made of.

For the most part, we still knowwhat traditional materials like paper and textiles are made ofand how they are produced.But now we have these amazing, futuristic composites --plastics that change shape,paints that conduct electricity,pigments that change color, fabrics that light up.Let me show you some examples.

So conductive ink allows us to paint circuitsinstead of using the traditionalprinted circuit boards or wires.In the case of this little example I'm holding,we used it to create a touch sensor that reacts to my skinby turning on this little light.Conductive ink has been used by artists,but recent developments indicate that we will soon be ableto use it in laser printers and pens.And this is a sheet of acrylic infusedwith colorless light-diffusing particles.What this means is that, while regular acryliconly diffuses light around the edges,this one illuminates across the entire surfacewhen I turn on the lights around it.Two of the known applications for this materialinclude interior design and multi-touch systems.And thermochromic pigmentschange color at a given temperature.So I'm going to place this on a hot platethat is set to a temperature only slightly higher than ambientand you can see what happens.So one of the principle applications for this materialis, amongst other things, in baby bottles,so it indicates when the contents are cool enough to drink.

So these are just a few of what are commonly knownas smart materials.In a few years, they will be in many of the objectsand technologies we use on a daily basis.We may not yet have the flying cars science fiction promised us,but we can have walls that change colordepending on temperature,keyboards that roll up,and windows that become opaque at the flick of a switch.

So I'm a social scientist by training,so why am I here today talking about smart materials?Well first of all, because I am a maker.I'm curious about how things workand how they are made,but also because I believe we should have a deeper understandingof the components that make up our world,and right now, we don't know enough aboutthese high-tech composites our future will be made of.Smart materials are hard to obtain in small quantities.There's barely any information available on how to use them,and very little is said about how they are produced.So for now, they exist mostly in this realmof trade secrets and patentsonly universities and corporations have access to.

So a little over three years ago, Kirsty Boyle and Istarted a project we called Open Materials.It's a website where we,and anyone else who wants to join us,share experiments, publish information,encourage others to contribute whenever they can,and aggregate resources such as research papersand tutorials by other makers like ourselves.We would like it to become a large,collectively generated databaseof do-it-yourself information on smart materials.

But why should we carehow smart materials work and what they are made of?First of all, because we can't shape what we don't understand,and what we don't understand and useends up shaping us.The objects we use, the clothes we wear,the houses we live in, all have a profound impacton our behavior, health and quality of life.So if we are to live in a world made of smart materials,we should know and understand them.Secondly, and just as important,innovation has always been fueled by tinkerers.So many times, amateurs, not experts,have been the inventors and improversof things ranging from mountain bikesto semiconductors, personal computers,airplanes.

The biggest challenge is that material science is complexand requires expensive equipment.But that's not always the case.Two scientists at University of Illinois understood thiswhen they published a paper on a simpler methodfor making conductive ink.Jordan Bunker, who had hadno experience with chemistry until then,read this paper and reproduced the experimentat his maker space using only off-the-shelf substancesand tools.He used a toaster oven,and he even made his own vortex mixer,based on a tutorial by another scientist/maker.Jordan then published his results online,including all the things he had tried and didn't work,so others could study and reproduce it.So Jordan's main form of innovationwas to take an experiment created in a well-equipped labat the universityand recreate it in a garage in Chicagousing only cheap materials and tools he made himself.And now that he published this work,others can pick up where he leftand devise even simpler processes and improvements.

Another example I'd like to mentionis Hannah Perner-Wilson's Kit-of-No-Parts.Her project's goal is to highlightthe expressive qualities of materialswhile focusing on the creativity and skills of the builder.Electronics kits are very powerfulin that they teach us how things work,but the constraints inherent in their designinfluence the way we learn.So Hannah's approach, on the other hand,is to formulate a series of techniquesfor creating unusual objectsthat free us from pre-designed constraintsby teaching us about the materials themselves.So amongst Hannah's many impressive experiments,this is one of my favorites.["Paper speakers"]What we're seeing here is just a piece of paperwith some copper tape on it connected to an mp3 playerand a magnet.(Music: "Happy Together")So based on the research by Marcelo Coelho from MIT,Hannah created a series of paper speakersout of a wide range of materialsfrom simple copper tape to conductive fabric and ink.Just like Jordan and so many other makers,Hannah published her recipesand allows anyone to copy and reproduce them.

But paper electronics is one of the most promising branchesof material sciencein that it allows us to create cheaper and flexible electronics.So Hannah's artisanal work,and the fact that she shared her findings,opens the doors to a series of new possibilitiesthat are both aesthetically appealing and innovative.

So the interesting thing about makersis that we create out of passion and curiosity,and we are not afraid to fail.We often tackle problems from unconventional angles,and, in the process, end up discovering alternativesor even better ways to do things.So the more people experiment with materials,the more researchers are willing to share their research,and manufacturers their knowledge,the better chances we have to create technologiesthat truly serve us all.

So I feel a bit as Ted Nelson must havewhen, in the early 1970s, he wrote,"You must understand computers now."Back then, computers were these large mainframesonly scientists cared about,and no one dreamed of even having one at home.So it's a little strange that I'm standing here and saying,"You must understand smart materials now."Just keep in mind that acquiring preemptive knowledgeabout emerging technologiesis the best way to ensure that we have a sayin the making of our future.

Thank you.